Windows XP Professional Remote Desktop Access
Windows XP Professional allows to
connect via TCP/IP from other systems to your XP
Professional system , operating the Windows XP system remotely :
Example #1: you are at home and
need to work with some data on your Windows XP Prof.
system at work, you establish a connection (for example via
modem) , then all keyboard and
mouse input from your system at home is transferred to your
Windows XP Prof system, where
this input is executed (for example to run programs), all
information, which would be shown on
the screen of the Windows XP Prof system, is send back for
display to the system, where you
are working on (using the keyboard and mouse).
Example #2 : You have a problem on your Windows XP Prof system
and ask help from the
Help-desk in your office, which is then able to connect to your
system to check out and
(hopefully) fix your problem.
Such Remote Desktop connections can be made via a LAN , WAN or
Setup of Remote Desktop
Access on Windows XP Prof :
||In the Control-Panel,
(or right-click "My Computer" on the desktop
and select Properties)
Select the tab : Remote
Remote Desktop is NOT available
for Windows XP Home Edition.
By default, "Remote Desktop"
is not activated.
Note: you need to be a user with
Administrative rights to activate
Remote Desktop !
Place the checkmark to activate,
to allow users to connect remotely
to this computer.
||You will get a warning message concerning
the configuration of Internet Connection
sharing and/or a personal firewall, which
must be configured to allow such Remote
||You need to "Select Remote Users..":
the users, which will be allowed to use
Remote Desktop access to connect to
||Any users with Administrator permission
will have automatically access permissions,
other users will have to be added.
||Note : while you or somebody else
is connecting via Remote Desktop,
you can NOT use the system :
The screen will display this message,
advising that the system is in use.
Connecting from a
Remote System :
You can use any 32-bit version of Windows to install / run the
Client s/w for Remote Desktop :
Windows95, 98, ME, NT4, 2000 (The Remote Desktop Client s/w is
installed by default already
on Windows XP Home and Windows XP Prof).
||To install the Remote Desktop
Client s/w, insert your Windows XP
CD-ROM on the Client PC.
Do NOT select to install Windows XP,
Select to "Perform additional tasks"
"Set up Remote Desktop Connection"
||Just run the rest of this setup.
Once the Remote Desktop Client s/w is installed, you can access
it via the Windows
Start-menu under Accessories / Communications :
||Enter the name or IP-address of the
Windows XP Prof system, to which
you like to connect.
You should look at the "Options >>"
to adjust / optimize your Remote Desktop
||Tab : General
You can enter here already the
Username and password, to be used
to connect to the Windows XP Prof.
To be able to re-use this information
on later connections, you can save
this configuration values and reuse them
||tab : Display
If you are connection via a high-speed
LAN network, you will not bother about
this, but when connecting via a modem,
you can optimize the connection and get
a faster response-time by selecting a
smaller Remote Desktop size and a
lower Color resolution.
||tab : Local Resources
You can configure the transfer of Sound
alerts and which of your local devices
(from the remote system, where you are
right now working on) will be accessible
during your Remote Desktop session.
More details will follow below.
||tab : Experience
To help the Remote Desktop s/w to
optimize the connection, select the
speed of your connection.
You should also de-select all "fancy"
features , like : Wallpaper and any
animation, because they will only use
Once the connection is properly
configured, you are ready to Connect :
||You may get this warning about the
access from the Remote computer to
your local devices.
||You will need to logon to
your Windows XP-system.
And then you have control over the desktop of the Windows XP
To come back to the "access to Local devices" : open
via Remote Desktop the
Windows Explorer : It will show the drives for BOTH the Windows
XP and the remote system :
You will see the same in "My Computer".
A note of warning : yes, you can access now the disks on both the
Windows XP and the remote
system, but when transferring data (for example via drag-and-drop
file-copy in Windows Explorer),
you are limited in the bandwidth of your connection, for example
if you connect via modem, you
will only have the bandwidth of the modem speed, so be carefully
on trying to copy large files, you
may have to wait a long time.
||Once you are finished with your job,
Windows Start-menu to "Disconnect",
terminate the Remote Desktop session.
Note : Have a closer look at this menu :
The system identifies itself as "Windows
which is the technology used by Microsoft to implement
the Remote Desktop access.