Installation of the Windows95/98 VPN-Client

	Install first Dialup-Networking
	On Windows95, it installs the default Clients and Protocols, to which you need to add the TCP/IP-protocol for Internet access.

If you are using Windows95, please check first, that you have the proper VPN-software installed: In the Network-applet, select ADD, then select Adapter and verify, that you see under the manufacturer Microsoft the "Microsoft Virtal Private Network Adapter". If that is NOT listed, you will first need to download and install the Dialup-Networking Upgrade 1.2.

	With Virtal Networking installed, the list in the Network-applet becomes long, so I pasted two together to get everything shown in one picture. by default, each protocol is bound to each adapter.
	In my specific setup, I only need: - the Client for Microsoft Networks - the binding of TCP/IP to the Dialup-Adapter (this will allow to connect to the Internet) - the binding of NetBEUI to the VPN-adapter (which is my protocol to connect to the VPN-server in this example). I deleted all other (not required) bindings

In case, that you need to install all components from scratch (on Windows95
or Windows98), it can be done step-by-step:

	Starting with nothing:
	Add first the Microsoft Dialup-Adapter
	Add the TCP/IP-protocol (to allow to connect to the Internet). Add the Client: "Client for Microsoft Network" (required in ANY case to save/ cache the Dialup-Networking Passwords).
	Now, add AGAIN (a second time) the Microsoft Dialup Adapter. It will get marked as: Dialup-Adapter#2 (VPN support) (sorry, this DUN upgrade does still NOT allow two simultaneus dialouts on 2 Modems to different targets)
	Add the adapter: Microsoft Virtual Private Networking Adapter. This will also install the protocol/binding:: NDISWAN->Microsoft Virtual Private Networking
	Since I will connect to my VPN-server via NetBEUI protocol, I need to install now NetBEUI-protocol.
	I delete any not required bindings: - NetBEUI to Dialup-Adapter (because that is using ONLY TCP/IP to connect to the Internet) - TCP/IP on Dialup-Adapter#2 (because my VPN-server will only accept incoming calls on NetBEUI-protocol.
	That's it. please continue with the next item, configuring the workgroup.

	In any case, make sure that your system is in the same workgroup/domain as the VPN-server
	Let the system install all s/w components.
	and it will need to restart.

After the reboot, we are ready to setup your dialup networking connections.

Configure the VPN Connection